pdf-icon

COM.LTE-DATA

SKU:M031-E

Description

COM.LTE-DATA is a stackable multifunctional LTE communication module with built-in LTE communication module A7600C1, supporting LTE-TDD/LTE-FDD/EDGE/GPRS and GSM frequency bands, and the transmission rate is LTE.CAT1 standard.

Its performance is stable, the appearance is small and well designed, the cost performance is high and can transmit data with low power consumption. The module has a DC power input and can provide 5V-12V power supply through an external power supply.

In order to facilitate the user to configure the pin, the DIP switch is used to set the pin. This module is especially suitable for remote meter reading, smart phones, smart wearables, smart parking, municipal management and other IoT industries with low power consumption and compact size as the core requirements.

This product is EOL now.

Notice

When used with the FIRE main control, due to the PSRAM pin conflict, please switch the DIP switch pins of the module base to TX(0/13), RX(5/15), and the device can use USB/ External DC is used for power supply.
When used with Core2 series main control, due to the different order of the base pin array, COM.X base pins TX(16), RX(17) correspond to the actual pins TX(14), RX of the Core2 main control (13) The equipment needs to use external DC for power supply.

Product Features

  • Stackable design
  • Independent external power supply
  • AT command control
  • SIM card type: MicroSIM
  • Status signal: two LED indicators
  • External antenna: SMA antenna
  • Serial communication: UART 115200bps
  • Frequency band:

    • LTE-TDD B34/B38/B39/B40/B41
    • LTE-FDD B1/B3/B5/B8
    • GSM/GPRS/EDGE 900/1800 MHz*
  • Data transmission speed:

    • LTE Cat 1
      • (UL) 5Mbps
      • (DL) 10Mbps
    • EDGE
      • UL/DL 236.8Kbps
    • GPRS
      • UL/DL 85.6Kbps
  • Protocol

    • TCP/IP/IPV4/IPV6/MultiPDP/FTP/FTPS/HTTP/HTTPS/DNS
    • RNDIS/PPP/ECM
    • SSL

Include

  • 1x COM.LTE-DATA module
  • 1x SMA antenna

Applications

  • Smart meter
  • Smart parking
  • Municipal management

Specification

Resources Parameter
Frequency band LTE-FDD/LTE-TDD/WCDMA/GSM
Network protocol TTCP/IP/IPV4/IPV6/ Multi-PDP/FTP/FTPS/HTTP/ HTTPS/DNS etc.
Communication UART 115200bps
DC interface specifications 5.5mm
Net Weight 54g
Gross Weight 89g
Product Size 54.2*54.2*13.2mm
Package Size 165*60*36mm

The module base has a DC power input interface. Please strictly follow the input range (5-12V) to prevent damage to the module when using this interface to connect to the power supply. The internal power DIP switch can adjust the voltage level of the internal terminal VIN to adapt to different modules.

Operator frequency bands in some countries

The following content is for reference only.

North America B4 (1700), B12 (700), B66 (1700), B71 (600), B26 (850)
Asia Pacific B1(2100), B3(1800), B5(850), B8(900), B18(850), B20(800), B26(850),B28(700)
Europe: B3 (1800), B8 (900) , B20 (800)
Latin America B2(1900), B3(1800), B5(850), B28(700)
Commonwealth of Independent States B3 (1800), B8 (900), B20 (800)
Sub-Saharan Africa B3(1800), B8(900)
Middle East, North Africa B8(900), B20(800)

EasyLoader

EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.

Download Windows Version Easyloader Download MacOS Version Easyloader

Description:
Check signal strength,Register to the network,5 and 13 of the DIP switch are set to ON.

Schematic

PinMap

M5Stack TX(GPIO0/13/17) RX(GPIO5/15/16) 5V GND
COM.LTE-DATA RX TX VIN GND

Example

To get complete code, please click here