Thermal2 Unit
Description
UNIT Thermal2 is a data processing MCU-equipped MLX90640 thermal imaging acquisition unit. It has 32x24 imaging pixels, a field of view of 110°x75°, and a temperature measurement range of -40°C to 300°C. The MCU uses ESP32, which is capable of high and low temperature alarms, average, maximum and minimum values reading, and data caching via data processing. The board integrates with a buzzer, RGB indicator, function and reset buttons, and communicates with the host computer through I2C. This product can be used together with the host computer or separately, and is applicable for temperature measurement and abnormal alarms.
Features
- MCU:ESP32-PICO-D4
- MLX90640 Infrared (IR) Sensor
- Reset buttom
- Passive buzzer
- Integrated programmable RGB LED
- GROVE I2C/HY2.0-4Pinterface
- Programming platform: Arduino/UIFlow
Includes
- 1x THERMAL2 Unit
- 1x HY2.0-4P cable
Applications
- High-precision non-contact temperature measurement
- Motion detection
- Visual infrared thermometer
- DIY Projects
Specification
| Resources | Parameters |
|---|---|
| MCU | ESP32-PICO-D4 |
| SENSOR | MLX90640 |
| POWER | 5V @ 0.5A |
| Field of View | 110°×75° |
| Measurement Range | -40°C ~ 300°C |
| Resolution | 32 x 24 |
| Refresh Rate | 0.5Hz-64Hz |
| Operating temperature | 0°C ~ 40°C |
| Housing material | ABS+Plastic ( PC ) |
| Product Size | 48mm × 24mm ×8mm |
| Package Size | 136mm × 92mm × 13mm |
| Product Weight | 4.9g |
| Package Weight | 10.7g |
Related Link
Schematic
Module Size
Examples
Arduino
UIFlow
UIFlow Blocks
- Get button status
- Get temperaturre alarm status
- Get device info
- Get I2C address
- Get function control
- Get refresh rate
- Get noise filter
- Get temperature monitor size
- Get buzzer frequency value
- Get buzzer duty cycle
- Get lowest temperature or highest temperature threshold value
- Get low temperature or high temperature buzzer frequency
- Get low temperature or high temperature buzzer interval
- Get low temperature or high temperature LED RGB colors
- Get data refresh control
- Get subpage information
- Get ( median / average / differential / lowest / highest ) temperature value
- Get ( differential / lowest / highest ) position
- Get temperature data buffer
- Set control for buzzer, neopixel, auto-refresh
- Set refresh rate
- Set noise filter
- Set temperature monitor size
- Set temperature alarm control
- Set buzzer frequency
- Set buzzer duty cycle
- Set RGB LED colors
- Set lowest temperature or highest temperature threshold value
- Set lowest temperature or highest temperature buzzer frequency
- Set lowest temperature or highest temperature buzzer interval
- Set lowest temperature or highest temperature LED color
