Unit RGB LED

SKU:A035 A035-B A035-C A035-D A035-E

Description

RGB LED is an extendable strip light with built-in SK6812) RGB LED. Just in case you haven’t heard about RGB LED yet, RGB LED features digitally addressable LEDs, which means each led can display RGB color and brightness individually.

It is very easy to program by Single-BUS with simple protocol.

Another feature is the extension and flexibility, It's possible to connect many of them up together to create a massive long LED display. It's important to note that, the brightness and the quantity of LEDs matters the most to the power consuming, if you have a bunch of them connected up, you will need extra power supply.

Note: The black PCB board at the end of the light bar is for the light bar signal input (connect to the M5Core), and the white PCB board is used to extend the light bar.

Features

Alternative length: 10cm(15 LED)/20cm(29 LED)/0.5m(72 LED)/1m(144 LED)/2m(288 LED)
Software Development Platform: Arduino, UIFlow (Blockly, Python)
extendable

Include

1x RGB LED Unit

Specifications

Resources	Parameter
Lamp bead model	SK6812
Power	18W/m
Data transfer rate	800K/s
Working temperature	-40°C-80°C
Waterproof rating	Bare board-not waterproof
Net weight	4g/6g/10g/12g/34g
Gross weight	5g/7g/11g/13g/35g
Product Size	10100/10200/10500/101000/10*2000mm
Package Size	1651003/1651003/1651003/1651003/1651003mm

EasyLoader

download EasyLoader

What is EasyLoader?

1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed. .

After downloading the software, double-click to run the application, connect the M5 device to the computer through the data cable, select the port parameters, click "Burn" to start burning. (For M5StickC burning, please Set the baud rate to 750000 or 115200)

PinMap

M5Core(GROVE A)	GPIO22	GPIO21	5V	GND
RGB LED Unit		Signal Pin	5V	GND

FastLED Library
FastLED Reference(Chinese version)

ソフトウェア

Arduino

Click here to download the Arduino example

UIFlow

Feature Introduction

Control a certain number of colored LEDs

Set index RGB color Set the color of the specified number of lights
Set from to RGB color Set the color of the light within the specified range
Set from to R G B Set the color of the light in the specified range to a custom color
Set all RGB color Set the color of all RGB lights
Set brightness Set the brightness of the RGB
Set neopixel hexagon matrix in Set the pattern on HEX and specify the color
et neopixel hexagon matrix in red green blue Set the pattern on HEX and customize the color

Usage

To get the complete code, please click here