pdf-icon

PoESP32

SKU:U138

Description

PoESP32 Unit is an ESP32 Ethernet Unit supports PoE (Power Over Ethernet). This module adopts ESP32 as built-in MAC, and IP101G as physical layer transceiver. Default firmware with ESP-AT, supports TCP,MQTT, HTTP protocols. It can connect to server with simple AT commands through serial port, achieving data transmission and remote control functions. This module simplify wiring and saves labor cost with PoE power supply, and It reserves the ability for secondary development to meet your requirement.

Product Features

  • Embedded ESP32 main controller
  • PHY solution:
    • Transceiver model IP101G
    • IEEE 802.3/802.3u standard
  • Ethernet Interface.
    • PoE standard: PoE IEEE802.3 AF / Support maximum load power 6W
    • RJ45 network port 10/100Mbps
  • Communication / download interface:
    • Default firmware is ESP-AT / Support secondary development to implement TCP Client/HTTP/CoAP and other protocols
    • Programmable / support secondary development, reserve program download interface
  • Power supply.
    • HY2.0-4P interface 5V DC power supply
    • PoE power supply (PoE IEEE802.3 AF)
  • Development method.
    • AT command, UART: 9600bps default
    • Development Platform: UIFlow(coming soon), Arduino, ESP-IDF

Included

  • 1x UNIT PoESP32
  • 1x HY2.0-4P Cable (20cm)
  • 1x Instruction manual

Applications

  • Ethernet Controller
  • TCP Client data passthrough

Specification

Specifications Parameters
ESP32-WROOM-32U 240MHz dual core, 600 DMIPS, 520KB SRAM (without integrated 3D antenna, does not support WiFi&BLE wireless function)
Flash 4MB
PHY IP101G: IEEE 802.3/802.3u
MAC-PHY Interface Type RMII
PoE Specifications PoE IEEE802.3 AF Specifications / Maximum Power 6W / Voltage DC 37-57V
Ethernet Interface Specifications RJ45 10/100Mbps
Reserved interface 1x HY2.0-4P interface, 1x program download interface
Communication interface UART 9600bps 8N1 AT command control
Communication logic level 3.3V
Net Weight 26.2g
Gross Weight 32.8g
Product size 72 * 26 * 19.2mm
Packing Size 75 * 36 * 20.5mm

PinMap

  • IP101G (ETH_ADDR = 1)
IPG101G (RMII PHY) ESP32
TX_EN G21
TX0 G19
TX1 G22
RX0 G25
RX1 G26
CRS_DV G27
IPG101G (SMI) ESP32
MDC G23
MDIO G18
  • HY2.0-4P
PoESP32 RXD TXD
M5CORE G16 G17

Schematic

Example

Arduino

Firmware