Servo Kit 360°
Description
The Servo Kit 360° is a 9g servo kit with a Lego fixed bracket. The kit provides a variety of servo accessories (servo wheels, axles, servo discs, etc.), which are easy to disassemble and assemble. The product is completely built with reference to Lego standard units, and can be easily combined with Lego series products, stimulating infinite creativity. It can be directly connected with Lego parts. This 360° servo can be adjusted for speed and steering control by adjusting the PWM duty cycle. When using it, pay attention to selecting the appropriate power supply voltage to prevent stalling and avoid burning out the servo.
Features
- Miniature servo system
- Compatible with Lego
- Simple to control
- Supports Arduino, UIFlow
Includes
- 2 x SG90 Servo 360°
- 2 x Servo wheels, 24mm
- 2 x M2*4mm Hexagon socket countersunk head self-tapping screws
- 1 x Square frame beam building block
- 1 x Servo fixing clip A
- 1 x Servo fixing clip B
- 2 x Servo disc accessory kits (including several servo discs and screws)
- 2 x Servo axles
- 2 x Grove to Servo adapters
- 4 x Black Connector
Specifications
| Specification | Parameter |
|---|---|
| Gear material | Metal motor teeth, plastic gearbox |
| PWM frequency | 50Hz/0.5~2.5MS |
| Servo weight | 9g |
| Torque | 1.6kg•cm/4.8V; 1.8kg•cm/6.0V |
| Stalling current | 750mA |
| No-load current | 60mA |
| Gear material | Metal motor teeth, plastic gearbox |
| Wire length | 3cm |
| Dead zone | 8μm |
| Spline | 20T |
| Voltage | 4.8 ~ 6.0V |
| Product Size | 40 x 12 x 36mm |
| Product Weight | 41.8g |
| Package Size | 163 x 118 x 22mm |
| Package Weight | 44.8g |
Softwares
Arduino
Example
This code can be used to control 360°/180° servo motors. When driving a 360° servo motor, it controls the speed and direction, while when driving a 180° servo motor, it controls the angle.