pdf-icon

CONTENTS

6060-PUSH

SKU:K028

描述

6060-PUSH 是M5Stack结构体系应用中的一款,运动控制模组.内置高精度步进电机,Mega328微处理器,1515铝型材框架.您可以通过编写控制器程序,对步进电机进行控制.二者通过RS485串行总线进行通信交互,能够实现高精度位移.适用与各类运动控制场景,如3D打印,直线运动控制等.

产品特性

  • 内置Mega328: GRBL
  • 可定制: 本体长度&有效行程
  • RS485通信
  • 1515 铝型材框架
  • 48 步进电机: 两相四线制
  • 行程:57mm
  • 输入电压: 12-24V
  • 电机功率: 10W

包含

  • 1x 6060 PUSH 模组

应用

  • 3D打印
  • 直线运动控制

规格参数

规格 参数
净重 569g
毛重 569g
产品尺寸 166*60*60mm
包装尺寸 166*60*60mm

项目案例

M5Stick-C with Stepper and IMU M5Stick-C with Stepper and IMU
M5Stick-C with Stepper and IMU
This uses the stepper driven 6060 push and rs485. The movement is based on the tilt of the M5stick which is measured with the built-in IMU.
AI Powered Garbage Sorting Demo AI Powered Garbage Sorting Demo
AI Powered Garbage Sorting Demo
AI camera that automatically sorting out the garbage.
PUSH6060 ATOM RS485 Test PUSH6060 ATOM RS485 Test
PUSH6060 ATOM RS485 Test
Pilot a Push6060 with ATOM and Tail485 with IUFLOW

案例程序


#include <M5Stack.h>
#define RX_PIN      16
#define TX_PIN      17
  
#define X_LOCAL 40
#define Y_LOCAL 40

#define X_OFF 160
#define Y_OFF 30

int distance = 0;    //步进电机移动步进值

void header(const char *string, uint16_t color){     //标题
    M5.Lcd.fillScreen(color);
    M5.Lcd.setTextSize(1);
    M5.Lcd.setTextColor(TFT_MAGENTA, TFT_BLUE);
    M5.Lcd.fillRect(0, 0, 320, 30, TFT_BLUE);
    M5.Lcd.setTextDatum(TC_DATUM);
    M5.Lcd.drawString(string, 160, 3, 4);
}

void setup() {
    M5.begin();
    M5.Power.begin();

    header("PUSH 6060", TFT_BLACK);
    M5.Lcd.setTextFont(2);
    M5.Lcd.setTextColor(TFT_WHITE, TFT_BLACK);  
    Serial2.begin(9600, SERIAL_8N1, RX_PIN, TX_PIN);  //配置串口2
    delay(500);
    Serial2.print("ID=123\r\n");                     //串口2输出ID=123\r\n,配置6060电机ID为123
}


void loop() {
    if(M5.BtnA.wasPressed()){                      //按键A按下发送ID\r\n,查看6060电机ID
      Serial2.print("ID\r\n");
    }
    if(M5.BtnB.wasPressed()){                      //按键B按下发送ID123:X%d\r\n控制移动绝对行程,其中%d为变量distance
      if(distance < 50){
         distance +=10;
         Serial2.printf("ID123:X%d\r\n",distance);
      }
    }
    if(M5.BtnC.wasPressed()){                      //按键C按下发送ID123Z\r\n,电机回原点
      Serial2.print("ID123Z\r\n");
    }
    if(Serial2.available()){                       //串口2接收6060返回的消息并打印
      char c = Serial2.read();
      Serial.print(c);
    }
    M5.update();
}

Arduino Uno 驱动程序

相关链接