Base LAN PoE v1.2
Description
LAN PoE BASE V12 is an Ethernet control module that integrates PoE (Power Over Ethernet) function. Adopt W5500 full hardware TCP/IP embedded Ethernet controller (SPI communication interface) scheme, support multiple communication protocols (TCP, UDP, IPv4, ICMP, ARP, IGMP and PPPoE, etc.) Network packet processing.
Internally reserved expansion pads can be used to expand RS485/RS232/CAN communication adapter modules or add custom designs, support PoE power supply and standard rail fixing accessories, no need for additional power supply wires and structural design. It can be easily deployed on industrial sites. With both performance and expansion flexibility, LAN PoE BASE V12 can provide you with a more compact embedded Ethernet connection solution.
Features
- W5500:
- Support 8 independent hardware sockets for simultaneous communication
- Support TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE protocols
- Integrated 10BaseT / 100Base-T Ethernet PHY
- Wired Ethernet access
- RJ45 adaptive 10/100M network port
- Power input method:
- Support PoE IEEE802.3 AF / Voltage DC 37-57V
- Support input power voltage: 9-24V
- Support MBUS 5V power supply (when used with M5CORE)
- Slide rail or magnetic fixation
- RS485/RS232/CAN communication expansion board
Include
- 1x LAN PoE BASE V12
- 1x RS485-To-TTL adapter board
- 1x RS232-To-TTL adapter board
- 1x CAN-To-TTL adapter board
- 1x HT3.96-4P terminal
- 2x HT3.96-3P terminals
- 1x 1.5mm hex key
- 1x 2.0mm hex key
- 1x 2.5mm hex key
- 10x 2mm Crimp Terminals
- 1x magnet (with hole in the middle, diameter 15mm, thickness 3mm)
- 1x 35mm silver metal rail
- 1x 35mm black rail clip
- 1x M3*6mm screw (countersunk head, mechanical teeth)
- 2x M3*28mm screws (cup head, mechanical teeth)
- 4x M2*5mm screws (cup head, self-tapping)
- 1x cable gland (M12)
- 1x 2.54mm-20P straight pin header (total height 5.32mm)
- 1x product sticker
Specifications
| Specifications | Parameters |
|---|---|
| W5500 Ethernet Controller | Supports Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE Supports 8 independent sockets simultaneously Supports High Speed Serial Peripheral Interface(SPI MODE 0, 3 ) Internal 32Kbytes Memory for TX/RX Buffers |
| RS485-To-TTL | SP485EEN-L/TR |
| RS232-To-TTL | MAX232ESE |
| CAN-To-TTL | CA-IS3050G |
| Ethernet port | RJ45 adaptive 10/100M Ethernet port |
Applications
- M5Core + LAN implements the belt controller
- Cable transmission of video data between PC and Core
EasyLoader
1.EasyLoader is a simple and fast program burner. The EasyLoader in each product page provides a product-related case program, which can be burned to the main control through simple steps, and a series of functional verification can be carried out .
PinMap
- W5500 Ethernet chip
| W5500 | ESP32 Chip |
|---|---|
| MOSI | GPIO23 |
| MISO | GPIO19 |
| CLK | GPIO18 |
| CS | GPIO26 |
| RST | GPIO13 |
| INTn | GPIO34 |
- RS485/RS232/CAN adapter board
| ESP32 Chip | RS485/RS232 |
|---|---|
| RX | GPIO5 |
| TX | GPIO15 |
Schematic
Model Size
Expanded board welding position
LAN BASE V12 comes standard with two adapter boards, TTL-RS485 + TTL-RS232, which are used to adapt to different communication interfaces. The welding positions are as follows. Please refer to the pin mapping table for the actual connection to GPIO.
- RS232 adapter board welding position or RS485 adapter board welding position
Related Link
- Datasheet - W5500
Examples
Video
LAN case-PC uses UDP protocol to realize wired video transmission to Core through LAN base