Base PoE
Description
Base PoE is an M5 Base that implements a W5500 Ethernet controller chip with PoE module, which provides Hardwired TCP/IP embedded Ethernet control to facilitate easier internet connection to embedded systems. W5500 integrates TCP/IP protocol stack, 10/100M Ethernet data link layer (MAC) and physical layer (PHY).This base supports RS485 / RS232 communication and can be used as an Ethernet to serial port server. It is specifically designed for industrial applications. PoE (Power over Ethernet) technology is supported. Through the built-in PoE module, power can be directly supplied to the base through PoE hub / switch without a separate power supply. It comes with a couple of HT3.96 connectors, metal rail and magnet discs for easy installation. The 6 pins of the HT3.96 connector are spare, you can wire them up with an RS485 or RS232 adapter board as you like.
Product Features
- Support PoE IEEE802.3 AF
- DC input supply voltage: 9-24V
- Ethernet access
- HT3.96 port for supporting RS485/RS232 communication
- 8 independent hardware socket simultaneous communication
- Support TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE protocols
- Support integrated 10BaseT / 100Base-T Ethernet PHY
- Easy to fixed on the wall
Applications
- Ethernet controller
- Ethernet and RS485/RS232 data forwarding
- Ethernet network node
Include
- 1x PoE Base
- 1x TTL-to-RS485 adapter board
- 1x TTL-to-RS232 adapter board
- 1x pin header 20pin
- 1x metal rails and magnet discs
- 3x HT3.96 terminal
- 2x 3pin
- 1x 4pin
- 10x cold crimp terminal（red Copper Lugs）
- 3x HEX KEY - 1x 1.5mm - 1x 2mm - 1x 2.5mm
- 2x hexagon socket head cap screws M3x28
- 4x hexagon socket tapping screw KA2x4
- 1x countersunk head screw M3x8
Specification
| Resources | Parameter |
|---|---|
| Ethernet chip | W5500 |
| Support protocols | TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE |
| RS485 chip | SP3485EE |
| RS232 chip | MAX232 |
| PoE power supply mode | Idle network cable pin power supply(10M/100M Ethernet),J4&J5(VC-),J7&J8(VC+) |
| PoE specification | IEEE802.3 AF |
| DC input voltage | 9V~24V |
| Net weight | 32g |
| Gross weight | 132g |
| Product size | 54*54*28mm |
| Package Size | 105*65*40mm |
EasyLoader
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.
Send messages or commands via Ethernet to control M5Stack 6060 PUSH or display messages on the screen
PinMap
| M5Stack | GPIO13 | GPIO18 | GPIO19 | GPIO23 | GPIO26 | GPIO34 | GPIO5 | GPIO15 |
|---|---|---|---|---|---|---|---|---|
| W5500 PoE | RST | CLK | MISO | MOSI | CS | INT | RX | TX |
Right side M-BUS pin definition
Schematic
