pdf-icon

CONTENTS

Hat DAC

SKU:U068

Description

DAC HAT is also a type of C-HAT specifically design for M5StickC controller. Same as DAC unit, this is a voltage output DAC converter for stickc. It can generate a voltage of 0～3.3V.
Packed with a DAC converter chip MCP4725, which is low-power, high accuracy, single-channel, 12-bit buffered voltage output Digital-to-Analog Converter (DAC) with a non-volatile memory (EEPROM). Its on-board precision output amplifier allows it to achieve rail-to-rail analog output swing.
The DAC input and configuration data can be programmed to the non-volatile memory (EEPROM) by the user using the I2C interface command. I2C address: 0x60

Features

  • Output: 0～3.3V
  • Software Development Platform: Arduino, UIFlow(Blockly, Python)
  • MCP4725
    • 12-BitResolution
    • External A0 Address Pin
    • Normal or Power-DownMode
    • Fast Settling Time of 6 μs (typical)
    • ExternalVoltageReference(VDD)
    • Rail-to-RailOutput
    • LowPowerConsumption
    • Single-SupplyOperation:2.7V to 5.5V
    • I2C Interface: address 0x60
    • ExtendedTemperatureRange:-40°Cto+125°C

Include

  • 1x DAC HAT
  • 1x 2 Pin 3.96 Pitch Terminal

Applications

  • SetPointerOffsetTrimming
  • SensorCalibration
  • Closed-LoopServoControl
  • LowPowerPortableInstrumentation,PCPeripherals
  • DataAcquisitionSystems

Specifications

Resources Parameter
Net weight 6g
Gross weight 19g
Product Size 24*25*13mm
Package Size 67*53*12mm

EasyLoader

download EasyLoader

What is EasyLoader?
1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed.
  1. After downloading the software, double-click to run the application, connect the M5 device to the computer through the data cable, select the port parameters, click "Burn" to start burning. (For M5StickC burning, please Set the baud rate to 750000 or 115200)

Pin Map

M5StickC GPIO0 GPIO26 5V GND
HAT ADC SDA SCL 5V GND

Schematic

Example

1. Arduino IDE

UIFlow

UIFlow1.0 UIFlow1.0 Hat dac Docs
UIFlow1.0 Hat dac Docs
How to use Hat dac and related API instructions in the UIFlow1.0

UIFlow

Open http://flow.m5stack.com and Load Demo