PoECAM-W is an open source fully programmable camera integrating PoE (Power Over Ethernet) and Wi-Fi. This item is ESP32 based webcam with W5500 embedded Ethernet controller, plus 2M pixel image sensor OV2640. PoECAM-W is equipped with a combination of 8MB PSRAM + 16MB Flash large memory. This teeny tiny with flexible power supply, you can get stable image by connecting the network cable in just 2 steps. It's wonderful for you to monitor warehouse, auto image acquisition, etc.
Resources | Parameters |
---|---|
MCU | ESP32-D0WDQ6-V3 |
Camera Module | OV2640 |
Ethernet Chip | W5500 |
FLASH | 16MB |
PSRAM | 8MB |
Pixel Size | 2.2 µm x 2.2 µm |
Automatic image control functions | Automatic Exposure Control (AEC), Automatic Gain Control (AGC), Automatic White Balance (AWB), Automatic Band Filter (ABF), and Automatic Black-Level Calibration (ABLC) |
Supports Hardwired TCP/IP Protocols | TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE |
DFOV | 65° |
Output Formats(8-bit) | YUV(422/420)/YCbCr422, RGB565/555, 8-bit compressed data, 8-/10-bit Raw RGB data |
Ethernet interface specifications | RJ45 |
MAXIMUM POWER | 6W |
Product Size | 64mm × 24mm × 18mm |
Package Size | 80mm × 37mm × 32mm |
Product Weight | 38g |
Package Weight | 45g |
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.
M5Core(GROVE A) | SCL | SDA | 5V | GND |
---|---|---|---|---|
PoECAM-W | GPIO33 | GPIO25 | 5V | GND |
PoECAM-WTo download the program, you need to connect an external ESP32 burner
,you can
Click here to buy the M5's official ESP32-Downloader kit, which includes a transfer board for easier connection