pdf-icon

Ultrasonic

SKU:U098

Description

Ultrasonic is an ultrasonic distance measuring sensor unit, with the capability of simultaneous reception and transmission. The ultrasonic probe has a sound frequency of 40KHz, a direction angle of ±20 ° and an accuracy of 1mm. The internal part is calculated by an RCWL-9600 ultrasonic distance measuring chip, and the measurement results can be directly obtained through I2C interface (0x57). The effective distance is 30 - 150cm.

This product is EOL now, we've released the updated version SONIC I2C , SONIC IO .

Features

  • Split transceiver
  • 30 - 150cm distance effectiveness
  • Wide angle range
  • I2C communication, result output directly

Includes

  • 1x Ultrasonic Unit
  • 1x Grove Cable(20cm)

Applications

  • Measuring distance
  • Avoid obstacles

Specification

Resources Parameters
Ranging chip RCWL-9600
Communication protocol I2C:0x57
Measuring distance 30 - 150cm
Sound pressure level of transmitter 108dB
Accuracy 1mm
Blind area 20mm
Receiver sensitivity -68dB
Product Size 56*24*12mm
Package Size 60*55*16mm
Product Weight 9g
Package Weight 23g

CoreS3 (K128)

BASIC-V27 (K001-V27)

CORE2 (K010)

M5StickC PLUS (K016-P)

AtomS3 (C123)

StampS3 (S007)

EasyLoader

PinMap

image

Module Size

module size

Examples

Arduino

UIFlow

本本教程将向您展示如何使用UIFlow2.0图形化编程平台初始化配置

Ultrasonic Unit Programming Guide

UIFlow Blocks

  • get distance
image

FAQ

Question: How to deal with the echo time of the ultrasonic sensor is too long or the ranging fails?

  • If the sensor's echo time is too long or cannot be detected, it may be because the ultrasonic sensor is too close to the obstacle, or the ultrasonic waves do not reflect properly on a particular material. You can keep the measurement target at a distance from the sensor by adjusting the operating range of the sensor.

Question: Can I use multiple ultrasonic sensors at the same time?

  • Yes, you can use multiple ultrasonic sensors. Each sensor is assigned a different Trigger and Echo pin, and measured and processed separately in the code.

Video

  • Tutorials