English
English
简体中文
日本語

Unit EncoderMotor Driver

SKU:U232

Description

Unit EncoderMotor Driver is a single-channel encoder DC motor driver unit featuring an STM32G031G8U6 main controller. It uses an I2C communication interface and provides one DC 5V motor output with a corresponding A/B encoder input, making it suitable for 6-wire encoder geared motors and TT geared motors. The driver supports PWM speed control, forward/reverse control, and closed-loop speed and position control. It integrates an INA199A current-sensing circuit and motor operating voltage detection, enabling real-time monitoring of motor current and voltage.

An onboard programmable RGB LED indicates the device operating status. The unit accepts an external DC 6 ~ 12V input and provides a DC 5V motor output through an onboard DC-DC buck converter. It is suitable for robot drive mechanisms, joint modules, smart cars, and similar applications.

Features

  • STM32G031G8U6 main controller
  • Single-channel encoder motor drive
    • Compatible with 6-wire encoder geared motors / TT geared motors (M+ / M- / GND / 5V / EN_B / EN_A)
    • Supports 3 ~ 15 PPR encoders
  • Motor control
    • PWM speed control
    • Forward/reverse / stop
    • A/B phase counting
    • Speed loop / position loop closed-loop control
    • Soft start / soft stop
    • Sleep
  • I2C communication interface
    • Default address 0x2F, software-configurable (0x08 ~ 0x77)
  • Flexible power supply
    • External power input: DC 6 ~ 12V
    • Grove interface power input: DC 5V
    • Integrated DC-DC buck converter for motor power and Grove interface output, with a maximum load of DC 5V@8A
  • Motor load
    • External power supply: maximum motor load DC 5V@1.2A
    • Grove interface power supply: total load ≤ DC 5V@1A
  • Power monitoring
    • INA199A motor current detection
    • Motor DC 5V operating voltage detection
  • Programmable RGB indicator

Includes

  • 1 x Unit EncoderMotor Driver
  • 1 x HY2.0-4P Grove cable (20cm)
  • 1 x PH2.0-2P cable (100mm)
  • 1 x PH2.0-6P cable (100mm)

Applications

  • Closed-loop control of encoder motors
  • Robot drive mechanisms / joint drives
  • Smart cars
  • Speed / position control for conveyors, turntables, and similar equipment
  • STEAM education and motor control instruction

Specifications

Specification Parameter
MCU STM32G031G8U6
Communication Interface I2C @ 0x2F, software-configurable (0x08 ~ 0x77)
Motor Driver Single-channel DRV8837DSGR H-bridge motor driver
Motor Load Maximum load: DC 5V@1.2A (external input supply DC 6 ~ 12V)
Motor Operating Modes PWM speed control, forward/reverse, soft start / soft stop, speed loop, position loop, sleep
Encoder Single-channel AB encoder input, supports 3 ~ 15 PPR
Encoder Motor Interface PH2.0-6P, compatible with 6-wire encoder geared motors / TT geared motors (M+ / M- / GND / 5V / EN_B / EN_A)
Power Supply PH2.0-2P external DC power input: DC 6 ~ 12V
HY2.0-4P Grove power input: DC 5V
Current Detection INA199A
RGB LED 1x WS2812C-2020
Product Size 32.1 x 24.0 x 8.0mm
Product Weight 4.8g
Package Size 138.0 x 93.0 x 11.0mm
Gross Weight 13.4g

Schematics

PinMap

HY2.0-4P

HY2.0-4P Black Red Yellow White
PORT.A GND 5V SDA SCL

Model Size

Structure

Datasheets

Softwares

Arduino

UiFlow2

ESP-IDF

Internal Firmware

Protocol

Video

Product Comparison

Product Compare Unit EncoderMotor Driver Unit EncoderMotor Driver Unit 4EncoderMotor Driver Unit 4EncoderMotor Driver
Communication Interface I2C I2C
Channel Count 1-channel encoder motor 4-channel encoder motor
Motor Driver DRV8837DSGR 4x DRV8837DSGR
Main Controller STM32G031G8U6 STM32F030C8T6
Encoder Motor Interface 1x PH2.0-6P 4x PH2.0-6P
Power Input DC 6 ~ 12V (1x PH2.0-2P) DC 6 ~ 12V (2x PH2.0-2P)
Load Capacity DC 5V@1.2A Single-channel DC 5V@1.2A
Current Detection INA199 INA199
Grove Interface 1x HY2.0-4P 2x HY2.0-4P
Product Positioning Single-motor control Multi-motor control
Page Tools
PDF