ADC

SKU:U013

Description

ADC unit is an integrated ADS1100 device which is a fully differential, 16-bit, self-calibrating, delta-sigma A/D converter.

It communicates through the I2C interface, which means you can collect AD data through PortA on the M5Core device in order to enhance your A/D capabilities and performance.

Product Features

COMPLETE DATA ACQUISITION SYSTEM IN A TINY SOT23-6 PACKAGE
16-BITS NO MISSING CODES
INL: 0.0125% of FSR MAX
CONTINUOUS SELF-CALIBRATION
SINGLE-CYCLE CONVERSION
PROGRAMMABLE GAIN AMPLIFIER with gain range of 1, 2, 4, OR 8
LOW NOISE: 4µVp-p
PROGRAMMABLE DATA RATE: 8SPS to 128SPS
INTERNAL SYSTEM CLOCK
I2CTM INTERFACE
POWER SUPPLY: 2.7V to 5.5V
LOW CURRENT CONSUMPTION: 90µA
Two LEGO-compatible holes

Include

1x ADC unit
1x GROVE Cable
1x HT3.96 Male Socket(2 pins)

Applications

ECG signal acquisition
Blood pressure measurement
Dynamometer

Specification

Resources	Parameter
INL	The full scale is 0.0125% of the range (maximum value)
Gain multiple	1, 2, 4, 8
Programming rate	8SPS to 128SPS
Current	90µA
Noise	4μVp-p
Communication protocol	I2C:0x48
Net weight	4g
Gross weight	19g
Product Size	322410mm
Package Size	675312mm

EasyLoader

download EasyLoader

1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed. .

After downloading the software, double-click to run the application, connect the M5 device to the computer through the data cable, select the port parameters, click "Burn" to start burning. (For M5StickC burning, please Set the baud rate to 750000 or 115200)

Currently EasyLoader is only suitable for Windows operating system, compatible with M5 system adopts ESP32 as the control core host. Before installing for M5Core, you need to install CP210X driver (you do not need to install with M5StickC as controller) Click here to download driver