IR
Description
IR is a pair of infrared photoelectric sensors from the M5Go Kit family. Contains 1x infrared emitter and 1x receiver.
IR remote control is widely used in consumer electronics, it can be used to operate devices such as a television set, DVD player, or other home appliance, from a short distance. Since this unit comes with emitter and receiver, you can practice not only on IR encode but also on IR decode.
Product Features
- 1x infrared emitter(wavelength:940nm)
- 1x infrared receiver
- Distance range: < 5m
- Software Development Platform: Arduino, UIFlow(Blockly,Python)
- Two Lego-compatible holes
Include
- 1x IR Unit
- 1x Grove Cable
Specification
| Resources | Parameter |
|---|---|
| infrared emitter wavelength | 940nm |
| Net weight | 4g |
| Gross weight | 17g |
| Product Size | 32*24*8mm |
| Package Size | 67*53*12mm |
EasyLoader
1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed. .
- After downloading the software, double-click to run the application, connect the M5 device to the computer through the data cable, select the port parameters, click "Burn" to start burning. (For M5StickC burning, please Set the baud rate to 750000 or 115200)
PinMap
| M5Core(GROVE B) | GPIO36 | GPIO26 | 5V | GND |
|---|---|---|---|---|
| IR Unit | Receiver Pin | Transmitter Pin | 5V | GND |
Schematic
Example
Arduino
To get the complete code, please click here
UIFlow
Feature Introduction
Launch or accept infrared remote control signals
state Received infrared signal returned 1
set on Send infrared signal
set off Stop sending
Usage
To get the complete code, please click here
