Unit RFID
SKU:U031
Description
RFID has an RFID MFRC522 chip inside.
The MFRC522 operates in the 13.56MHz frequency band and uses the modulation and demodulation principle to interact with the proximity RF card. This unit can realize the function of the card reading and writing device, to identify and record multiple card information, to encode and authority a RF card.
It is able tp establish applications such as access control system, punching system, warehouse goods storage and community vehicle access registration.
Connect this Unit to GROVE PORTA on M5Core, I2C address is 0x28.
RFID2 compared to the previous generation RFID UNIT only makes the replacement of read and write IC (RC522->WS1850S), there is no difference in function.
The product has been discontinued.
Product Features
- 13.56MHz Operation frequency
- I2C data rate: Fast mode: up to 400 Kbit/s; High-speed mode: up to 3400 Kbit/s
- RC522 Transceiver Buffer: 64 bytes
- Supported protocol: ISO14443A, MIFARE and NTAG
- Operate temperature: -20℃-85℃
- How long data be saved for: > 10 years
- Reading and writing distance: < 20 mm
- Program Platform: Arduino, UIFlow (Blockly, Python)
- Two Lego installation holes
Include
- 1x RFID unit
- 1x GROVE Cable
Applications
- Smart home access control system
- Vehicle management
- Smart transportation
- Smart bookshelf
Specification
Resources | Parameter |
Communication protocol | I2C: 0x28 |
Net weight | 6g |
Gross weight | 21g |
Product Size | 48*24*8mm |
Package Size | 67*53*12mm |
EasyLoader
download EasyLoader
What is EasyLoader?
1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed. .
- After downloading the software, double-click to run the application, connect the M5 device to the computer through the data cable, select the port parameters, click "Burn" to start burning. (For M5StickC burning, please Set the baud rate to 750000 or 115200)
PinMap
M5Core ( GROVE A ) | GPIO22 | GPIO21 | 5V | GND |
RFID Unit | SCL | SDA | 5V | GND |
Schematic
Example
Arduino
After programming the RFID.ino, the IC card or the mobile phone NFC, close to the unit, moves back and forth around the unit, and the UID of the IC card or the RFID chip in the mobile phone will be printed on the screen of the M5Core.
UIFlow
How to use Unit rfid and related API instructions in the UIFlow1.0
Usage
After opening and burning this example using
UIFlow
, place the proximity card on the Unit surface and the screen displays “True” and the UID number of the card.
Video