Unit Zigbee SKU:U110
Description Zigbee is a self-organizing network communication module launched by M5Stack. The module adopts the CC2630F128 solution, integrates the Zigbee protocol stack internally, and provides an open serial communication interface. It features an external antenna, with a stable single-node communication distance of up to 1 km and supports up to 200 levels of router depth. Through MESH networking, it can significantly extend the range of your IoT applications, offering both ultra-low power consumption and high sensitivity. The Zigbee network can support hundreds of nodes and has enhanced security features, providing a complete and interoperable IoT solution for home and building automation.
Product Features CC2630F128 (dual ARM core-32 bit) Serial communication Low power consumption (module working current: 25mA, sleep 5uA) Dynamic routing maintenance, supporting 200-level routing depth Transmission speed 250Kbps Node communication distance 1km UART transparent transmission/broadcasting/P2P Include 1x Zigbee Unit 1x SMA antenna 1x Grove Cable Applications Smart Home IoT collection node Building Automation Specification Resources Parameter CC2630F128 ARM Cortex-M3 32bit communication UART 38400bps 8N1(default) Communication distance 1km (Open area) working frequency 2.4GHZ (2405MHz-2480MHz, step:5MHz) Net weight 24g Gross weight 50g Product Size 71.5*24*8mm Package Size 136*92*10mm
EasyLoader PinMap Core TX(GPIO 17) RX(GPIO 16) 5V GND Zigbee Unit RX TX VIN GND
Schematic Example Arduino UIFlow
How to use Unit zigbee and related API instructions in the UIFlow2.0
Video DRFZigbee.h - API
void begin (HardwareSerial & uart) { _uartp = &uart;}
int linkMoudle () ;
int readModuleparm (zigbee_arg_t *parm) ;
int setModuleparm (zigbee_arg_t &parm) ;
int getNetworksTopology () ;
int rebootModule () ;
int8_t getModuleRSSI (nodeRSSI_t *nodeRSSIPtr = nullptr ) ;
int reviceData (reviceData_t *revice,uint8_t type = kP2PCustomIDMode,size_t timeout = 1000 ) ;
void sendData (uint8_t cmd, const std::initializer_list<uint8_t > args) ;
int sendCMDAndWaitRevice (uint8_t cmd, byteArray &array, byteArray *reviceArray = nullptr , size_t timeout = 1000 ) ;
int sendCMDAndWaitRevice (uint8_t cmd, const std::initializer_list<uint8_t > args, byteArray *reviceArray = nullptr , size_t timeout = 1000 ) ;
int sendDataP2P (uint8_t mode,uint16_t addr,uint8_t *dataptr,size_t length) ;
int sendDataP2P (uint8_t mode,uint16_t addr,byteArray &array) ;
int sendDataP2P (uint8_t mode,uint16_t addr,const std::initializer_list<uint8_t > args) ;
--------------------------------------------------------------
DRFZigbee::zigbee_arg_t *arg = new DRFZigbee::zigbee_arg_t ;
uint8_t main_pointType;
uint16_t main_PANID;
uint8_t main_channel;
uint8_t main_transmissionMode;
uint16_t main_customID;
uint16_t main_res0;
uint8_t main_uartBaud;
uint8_t main_uartBit;
uint8_t main_uatrtStop;
uint8_t main_uartCheck;
uint16_t main_res1;
uint8_t main_ATN;
uint8_t main_mac[8 ];
uint8_t preset_pointType;
uint16_t preset_PANID;
uint8_t preset_channel;
uint8_t preset_transmissionMode;
uint16_t preset_customID;
uint16_t preset_res0;
uint8_t preset_uartBaud;
uint8_t preset_uartBit;
uint8_t preset_uatrtStop;
uint8_t preset_uartCheck;
uint16_t preset_res1;
uint8_t preset_ATN;
uint16_t shortAddr;
uint8_t res3;
uint8_t encryption;
uint8_t password[4 ];