M5StickC
教程&快速上手
本教程将向你介绍, 如何通过 Arduino IDE 编程控制 M5StickC 设备
本教程将向你介绍, 如何通过 Micropython 编程控制 M5StickC 设备
描述
M5StickC 是一款精致小巧的开发板.它作为 M5Stick 的升级版本,提供了更多的拓展接口与按键,拥有出色性能的同时兼具低功耗特性.无论是用作编程学习还是项目开发, M5StickC 都能够提供可靠的硬件支持.
它能做什么? 这个小巧玲珑的开发工具,能够激发你无限的创作可能. M5StickC 能够帮助你快速的搭建物联网产品原型,简化整个的开发过程.即便是刚开始接触编程开发的初学者,也能够搭建出一些有趣的应用,并应用到实际生活中.
M5StickC 是 M5Stack 产品系列中的核心设备之一,该产品系列建立在不断发展的硬件和软件生态系统中.它有着许多兼容的拓展功能模块,丰富开源代码、活跃的论坛社区,这些资源都可以在你的开发过程中为你提供最优服务.
开关机操作:
开机:按复位按键,持续至少 2 秒
关机:按复位按键,持续至少 6 秒
注意:
M5StickC 支持的波特率: 1200 ~115200, 250K, 500K, 750K, 1500K
VBUS_VIN与VBUS_USB的输入范围限制在4.8-5.5V,VBUS供电时将通过AXP192电源管理为内置电池进行充电。
产品特性
- 基于 ESP32开发
- 内置3轴加速计与3轴陀螺仪
- 内置Red LED
- 集成红外发射管
- 内置RTC
- 集成麦克风
- 用户按键, LCD(0.96 寸), 电源/复位按键
- 95 mAh 锂电池
- 拓展接口
- 可穿戴 & 可固定
- 兼容多平台开发:
包含
- 1x M5StickC
- 1x Type-C USB(20cm)
应用
- 可穿戴设备
- 物联网控制器
- STEM教育
- DIY作品
- 智能家居设备
规格参数
| 主控资源 | 参数 |
|---|---|
| ESP32 | 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi |
| Flash闪存 | 4MB Flash |
| 输入电压 | 5V @ 500mA |
| 接口 | TypeC x 1, GROVE(I2C+I/0+UART) x 1 |
| LCD屏幕 | 0.96 inch, 80*160 Colorful TFT LCD, ST7735SV |
| 麦克风 | SPM1423 |
| 按键 | 自定义按键 x 2 |
| LED | 红色 LED x 1 |
| RTC | BM8563 |
| PMU | AXP192 |
| IR | Infrared transmission |
| MEMS | MPU6886 |
| 天线 | 2.4G 3D天线 |
| PIN接口 | G0, G26, G36 |
| 电池 | 95 mAh @ 3.7V, inside vb |
| 工作温度 | 0°C to 60°C |
| 净重 | 15.1g |
| 毛重 | 33g |
| 产品尺寸 | 48.2 * 25.5 * 13.7mm |
| 包装尺寸 | 55 * 55 * 20mm |
| 外壳材质 | Plastic ( PC ) |
驱动安装
将设备连接至PC，打开设备管理器为设备安装
FTDI驱动
。以win10环境为例,下载匹配操作系统的驱动文件, 并解压,通过设备管理器进行安装。（注:某些系统环境下,需要安装两次,驱动才会生效,未识别的设备名通常为
M5Stack或USB Serial, Windows推荐使用驱动文件在设备管理器直接进行安装(自定义更新), 可执行文件安装方式可能无法正常工作）。
点击此处，前往下载FTDI驱动
EasyLoader
EasyLoader是一个简洁快速的程序烧录器,其内置了一个产品相关的案例程序,通过简单步骤将其烧录至主控,即可进行一系列的功能验证.
案例描述:
加速计,麦克风,LED,IR,RTC,无线连接等硬件测试,单击A键或B键可切换测试项.
加速计,麦克风,LED,IR,RTC,无线连接等硬件测试,单击A键或B键可切换测试项.
管脚映射
红色 LED & 红外发射管 IR & 按键 BUTTON A & 按键 BUTTON B
| ESP32 芯片 | GPIO10 | GPIO9 | GPIO37 | GPIO39 |
|---|---|---|---|---|
| 红色 LED | LED 管脚 | |||
| 红外发射管 IR | 发射管引脚 | |||
| 按键 BUTTON A | 按键管脚 | |||
| 按键 BUTTON B | 按键管脚 |
彩色TFT屏幕
驱动芯片:ST7735S
分辨率:80 * 160
| ESP32 芯片 | GPIO15 | GPIO13 | GPIO23 | GPIO18 | GPIO5 |
|---|---|---|---|---|---|
| TFT 屏幕 | TFT_MOSI | TFT_CLK | TFT_DC | TFT_RST | TFT_CS |
GROVE 接口
| ESP32 芯片 | GPIO33 | GPIO32 | 5V | GND |
|---|---|---|---|---|
| GROVE 接口 | SCL | SDA | 5V | GND |
麦克风 MIC (SPM1423)
| ESP32 芯片 | GPIO0 | GPIO34 |
|---|---|---|
| 麦克风 MIC | CLK | DATA |
六轴IMU (SH200Q/MPU6886) & 电源管理芯片 (AXP192) & RTC (BM8563)
| ESP32 | G21 | G22 | G35 |
|---|---|---|---|
| AXP192 | SDA | SCL | IRQ |
| MPU6886 | SDA | SCL | IRQ |
| BM8563 | SDA | SCL | IRQ |
电源管理芯片 (AXP192)
| Microphone | RTC | TFT backlight | TFT IC | ESP32/3.3V MPU6886/SH200Q | 5V GROVE |
|---|---|---|---|---|---|
| LDOio0 | LDO1 | LDO2 | LDO3 | DC-DC1 | IPSOUT |
充电电流测量值
| 充电电流 | 充满后电流(关机) | 充满电(开机） |
|---|---|---|
| 0.488A | 0.066A | 0.181A |
电源结构框图
原理图
结构设计文件
相关链接
Datasheet
API
项目案例
M5StickC (ESP32 Pico) with built-in i2s microphone is used for audio spectrum analysis (ArduinoFFT) and visualization on an RGB led strip.
m5WebRadio is a sketch to play web streaming radio station on a M5Stick-C esp32 module: A $13 esp32 net radio player.
Take a $9 M5StickC, few lines of YAML configuration to build ESPHome, Home Assistant and start controlling your TVs and climates in minutes.
This simple project visualizes the current data of the coronavirus outbreak of different countries in real-time on an M5StickC.
A hand-washing timer with water sound detection, which uses the M5StickC's built-in microphone and does not require any external components.
A library to display texts on the M5StickC in any orientation. The display scrolls and wraps text lines automatically.
(First?) Libra Watch & Hardware wallet. Built on M5SickC devices using KULAP libra services.
A wearable, sensor-packed ESP32 IoT device with TFT display.
To build a Nixie tube clock is a perpetual project on my mind. I wanted to see was made by software.
Got a few mins to do a little clock, so here it is
Play any animated GIF file from SPIFFS directly onto TFT screen as-is, WITHOUT converting to RGB565 or PROGMEM as script.
A tool that helps makers and professionals level their FDM-based 3D Print Bed
I made a CO2 concentration meter for the purpose of room ventilation guide. The CO2 sensor is MH-Z19B, NDIR type.
This is a simple project using M5Stick and MicroPython in order to obtain data from the Hall sensors and temperature embedded in the chip.
In this tutorial we’ll show you the most efficient and easy to use application of M5Stick-C as smart watch.
A watch on wrist is worth two in the drawer. Why not your own DIY watch with #M5StickC? A watch with good battery life and smart features.
How to program M5Stack products using UIFlow and have Thonny running to diagnose errors over USB.
We can receive iPhone notifications via BLE, ANCS. M5StickC is including BLE module, LCD, RTC, Battery. Let's make the 🍎WATCH🍎.
A simple watch (long stamina, 3 alarms, settings over Bluetooth and mobile application) with big potential. :) #M5StickC
I made a Blynk-controlled mini car using M5Stick-C. Pretty good!
I tried sound signal communication with Chirp using M5StickC.
A simple watch for M5StickC with clock and date. You can also see battery level and display images.
Utilize a 6-axis IMU sensor SH200Q, to capture a magic wand motion.
Alexa and Google Assistant-compatible Wi-Fi sensor and alarm. Works on any flat surfaces: fridge, door, window, garage door, etc.
Using M5StickC on RoverC and JoyC with M5Atom attached to display direction of the RoverC.
Simple MicroPython code for the ATOM 5 x 5 LED matrix and its built-in MPU6886 accelerometer. It works with the M5StickC + NeoFlash Hat.
"MiMaMori Alert" is automatic security camera for your home. Automatic learning without teacher images, and notify if something is visitor.
Train a neural network model in 10 minutes, and use it on ESP32 with MicroPython to control a light switch. Everything done in browser.
Use Bluetooth serial to program omnidirectional movement sequences. Make a game out of it and try to guide the robot around obstacles.
M5StickV and M5StickC with HID Bluetooth Wireless or Atomic QR-Code reader
Gamepad (prototype) based on M5StickC (ESP32 Pico) with I2C joystick module, dual button unit, and Bluetooth Low Energy connectivity.
A robot that standing with steel linear of motors.
This is the war for getting the time...
This is a Cheering Watch using M5StickC and M5StickV. Estimate what action you are taking from this device acceleration and cheer up!!
I wanted to make a watch but also a wearable tool.
M5StickC + Angle unit = Protractor (detecting range: 0-180 degrees）
In this tutorial we will learn how to get the date and time fron NIST TIME server using M5Stack StickC and Visuino, Watch the video.
A inner maker competition of M5Stack.
Analog clock for M5StickC whose background can be changed with PNG file data.
Used StickC with ESPHap library to connect to HomeKit
This uses the stepper driven 6060 push and rs485. The movement is based on the tilt of the M5stick which is measured with the built-in IMU.
Classical snake mini-game, geolocation & maps app, twitch client, and a few more software projects and libraries.
Pilot Phillips Hue with M5Stick.
A low cost, simple to customise and program lone worker monitor or fall alarm.
Make a simple watch device using UIFlow.
The idea is simple, I would like to create Home Automation unit with something intelligent. So I combine M5StickV and M5StickC.
A "simple" binary clock for the M5StickC. Using NTP to set the time, and the RTC to display the time. No need to set a timezone either.
How to connect a passive buzzer to an M5StickC.
Temperature Detection
Quickly adding a spooky eye to your project with an esp32 TFT module and an acrylic half sphere lens.
Loose meetings are a bad business culture in Japan. The device “NeckTimer” that can appeal to the surroundings casually solves on time!
In this project we will learn how to make a Wi-Fi Scanner using a M5StickC ESP32 module to Display the Wi-Fi networks around.
Detailed tutorial on how to enable your ESP32 to send SMS
I tried indoor positioning by BLE with iBeacon and M5MtickC
Using M5stickV (UnitV)and its standard Face Detection Model.....Upgrade to enable for Web Stream using M5stickC(ESP32)
Make a doorbell for the front door with M5StickC and notify Slack when the button is pressed.
Counting COCOA(COVID-19 Contact-Confirming Application) around you with M5StickC
Stickv is used to realize the AI identification of traffic signs, and stickc is used as the executive component. Thanks @CangHai
Thanks @memex_pibo Provided materials，this is a detailed workflow about VR live performance
A very basic neopixel light show that employs fundamental coding, math, and loop iteration and throws in some basic MQTT fun
In this tutorial we will learn how to program ESP32 M5Stack StickC with Arduino IDE and Visuino to Display a time on the LCD and also set th
In this tutorial we will learn how to program ESP32 M5Stack StickC with Arduino IDE and Visuino to Display any text on LCD.
@HomeMadeGarbage The goldfish tank monitoring system has become a form, and it is an application of the edge AI of this subject.
A digital wearable D&D dice roller using the m5stickC and UI Flow
Transit NTP acquisition time short-distance transmission within weak distance.
S.M.A.R.S Quad using M5Stack electronic components.
This is an example of using a triaxial accelerometer to determine whether a fish is hooked.
Using the M5StickC, we developed a product that allows you to wash your hands without touching the device.
Working from home you're constantly doubting your internet speed. I made an M5StickC app to check upon thrashing or yelling
In this project we will learn how to display a random color on the NeoPixels LED Ring using a M5StickC ESP32 board. Watch the Video.
When a specific user tweets a new tweet, it will appear on the M5StickC display and notify you.
In this project we will learn how to make a mini Alarm Warning using a mini PIR sensor and a M5StickC ESP32 board. Watch the video!
Turns your M5StickC with the ToF HAT into a laser rangefinder.
This is a case about controlling GOPRO with M5StickC
In this tutorial we will learn how to program ESP32 M5Stack StickC to Display a time on the LCD and also set the time using StickC buttons.
In this tutorial we will learn how to program ESP32 M5Stack StickC with Arduino IDE and Visuino to Display the time on the LCD.
We have developed a fishing device using M5Stack. It was easy to create and I was able to actually catch the fish.
In this project we will learn how to use a FAN L9110 module using a M5StickC ESP32 board.
I tried to communicate with Unity-M5Stack via WebSocket. M5Stack is a gadget with a built-in ESP32 module that enables Wi-Fi commun
In this project we will learn how to connect and make an LED Blink using a M5StickC ESP32 module.
This year's Christmas, I decorated the tree with M5Stack devices.
I built a device to display the name of the next person to receive a present on the TV to make the bestowment more fun and organized.
In this project we will learn how to Change the LED Brightness with a Button using a M5StickC ESP32 module. Watch the Video.
In this video we will learn how to send values from StickC board to Delphi VCL Application using Visuino.
A simple game using M5StickC. Display the block in HTML in a web browser and control the ball with JoyStick.
In this tutorial we will learn how to program ESP32 M5Stack StickC with Arduino IDE and Visuino to Display the Temperature,Humidity Pressure
Sometimes when you connect a StickC board to the computer a mouse cursor can start to jump all over the screen.
In this tutorial we will learn how to program ESP32 M5Stack StickC with Arduino IDE and Visuino. Watch a demonstration video.
Oldschool fire demo
A watch that works with a small M5StickC Equipped with a minimum operating clock and automatic sleep mode, contributing to energy saving
おやすみ #M5StickC
案例程序
ArduinoIDE
相关视频
- M5StickC 的案例 - 自动贩卖机
- 智能设备通过M5Stack StickC进行验证，连接至公共Wi-Fi
版本变更
| 上市日期 | 产品变动 | 备注: |
|---|---|---|
| 2019.3 | 首次发售 | / |
| 2019.8 | SH200Q变更为MPU6886 | / |
| 2019.10 | 升级底部,添加铜螺母 | / |
| 2020.3 | 电池容量80mAh变更为95mAh | / |