M5PoECAM-W V1.1 is a programmable PoE camera based on the "ESP32+W5500" solution, featuring a 3-megapixel OV3660 image sensor with a 66.5° field of view. It integrates PoE (power over Ethernet, max power consumption 6W) and Wi-Fi functionality. Equipped with 16MB Flash and 8MB PSRAM, programs can be downloaded via the Micro-USB interface. This camera offers a variety of interfaces and functional modules, including a G37 button, LED indicator light (G0), Grove interface (EXT_PORT), and expansion pins. It also comes with a camera mounting clip and LEGO-compatible clip. Suitable for image monitoring, remote acquisition, smart home, industrial automation, and scenarios requiring devices powered through PoE cabling.
Resources | Parameters |
---|---|
SoC | ESP32-D0WDQ6-V3 |
Camera Module | OV3660 @3 Megapixel |
DFOV | 66.5° |
Ethernet Chip | W5500 |
FLASH | 16MB |
PSRAM | 8MB |
Wi-Fi | 802.11 b/g/n |
Pixel Size | 1.75µm x 1.75µm |
Output Format | RAW RGB565/555/444 YUV422/420 YCbCr422 JPEG |
Automatic image control functions | Automatic Exposure Control (AEC) Automatic Gain Control (AGC) Automatic White Balance (AWB) Automatic Band Filter (ABF) and Automatic Black-Level Calibration (ABLC) |
FOV | 65° |
Supports Hardwired TCP/IP Protocols | TCP、UDP、ICMP、IPv4、ARP、IGMP、PPPoE |
Ethernet interface specifications | RJ45 |
PoE | PoE IEEE802.3AF specification (Max power 6w) |
Product Size | 64*24*18mm |
Package Size | 80*37*32mm |
Product Weight | 38g |
Package Weight | 45g |
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.
ESP32-D0WDQ6-V3 | GPIO33 | GPIO25 | 5V | GND | GPIO37 | GPIO0 |
---|---|---|---|---|---|---|
Grove | SCL | SDA | VCC | GND | ||
Button | Button | |||||
LED(Blue) | LED |
ESP32-D0WDQ6-V3 | CHIP_UP | GPIO0 | GND | VCC | GPIO1 | GPIO3 |
---|---|---|---|---|---|---|
Expansion pin | EN | G0 | G | 3.3V | G1 | G3 |