pdf-icon

Unit PoE CAM

SKU:U121

Description

PoECAM is an open source Fully programmable poe camera integrating PoE (Power Over Ethernet) . This item is ESP32 based webcam with W5500 embedded Ethernet controller plus 2M pixel image sensor OV2640. PoECAM equipped with a combination of 8MB PSRAM + 16MB Flash large memory. This teeny tiny with flexible power supply, you can get stable image by connecting the network cable in just 2 steps. It's wonderful for you to monitor warehouse, get auto image acquisition, etc.

  • Plug and Play:

    • One step to get the IP by connecting to the network cable, You can view the images from any device in the wireless LAN.
    • Image data acquisition due to it's own existing software
    • CameraTool'/UART image transfer with PC upper computer
  • Abundant features:

    • ESP32 embedded, reserved burning interface for developing
    • W5500 embedded Ethernet controller supports `TCP, UDP, IPv4, ICMP, ARP, IGMP and PPPoE protocols
    • Exporting image data in various formats /Tuning Image Parameters
  • Highly flexible:

    • Support PoE power supply Network cable & power supply 2 in 1, wiring simplified / Support 5V power supply
    • GROVE expansion interface
    • Camera fixed back clip for wall hanging

Features

  • Rich image processing API interface
  • PoE IEEE802.3 AF specification
  • Ethernet webcam
  • Built-in ESP32 MCU
  • Development platform:
    • UIFlow, Arduino, ESP-IDF
    • Software code / hardware open source

Include

  • 1x PoECAM
  • 1x Camera mount clip
  • 1x LEGO compatible clip

Applications

  • Warehouse monitoring
  • Timed filming

Specifications

Specifications Parameters
ESP32-D0WDQ6-V3 240MHz dual core, 600 DMIPS, 520KB SRAM
Flash 16MB
PSRAM 8MB
Image Sensor OV2640
Maximum Resolution 2MegaPixel
OV2640 supports the maximum image transmission rate YUV(422/420)/YCbCr422, 8-bit compressed data, RGB565/555, 8-/10-bit Raw RGB data
DFOV 65°
PoE specification PoE IEEE802.3 AF specification / maximum power 6W / Voltage DC 37-57V
Ethernet Controller W5500, built-in 32Kbytes buffer area, SPI interface
Support protocols TCP, UDP, IPv4, ICMP, ARP, IGMP and PPPoE protocols
Ethernet interface specifications RJ45
Basic Peripherals 1x programmable buttons, 2x work indicator lights
Net weight 38g
Gross weight 45g
Product size 64 * 24 * 18mm
Packing size 80 * 37 * 32mm
Notes:
1. The PoECAM download program requires an external ESP32 burner, you can click here to buy the official M5 ESP32-Downloader kit, which includes a small adapter board, and the connection will be even better Convenient
2. The factory firmware of PoECAM will automatically obtain the IP after connecting to the switch and start the web server. By viewing the serial port output of PoECAM, you can get the IP address and the image stream URL, and you can preview the image in real time by visiting the URL with a browser under the same local area network.

Pin mapping

OV2640 interface

接口 Camera Pin PoE CAM
SCCB Clock SIOC G12
SCCB Data SIOD G14
System Clock XCLK G27
Vertical Sync VSYNC G22
Horizontal Reference HREF G26
Pixel Clock PCLK G21
Pixel Data Bit 0 D0 G32
Pixel Data Bit 1 D1 G35
Pixel Data Bit 2 D2 G34
Pixel Data Bit 3 D3 G5
Pixel Data Bit 4 D4 G39
Pixel Data Bit 5 D5 G18
Pixel Data Bit 6 D6 G36
Pixel Data Bit 7 D7 G19
Camera Reset RESET G15
Camera Power Down PWDN -1
Power Supply 3.3V 3V3 3V3
Ground GND GND

W5500 interface

W5500 PoE CAM
MOSI G13
MISO G38
SCLK G23
CS G4

EXT.PORT

EXT.PORT PoE CAM
RX G25
TX G33
5V 5V
GND GND

Right button

Button PoE CAM
Signal G37

Blue LED

Blue LED PoE CAM
Signal G0

Schematic

Schematic Diagram PDF File

Example

Arduino

Video