Unit CAM
Description
Unit CAM M5 launched a very cost-effective Wi-Fi camera, using ESP32-WROOM-32E control core + 2MegaPixel image sensor (OV2640) solution on the hardware, using the most simplified design, no extra peripherals. The factory software integrates image transmission firmware, provides image data acquisition, image parameter (white balance, exposure, gain, size and other attributes) adjustment interface, users can directly acquire image data through UART or Wi-Fi, and interact with the camera. Support UIFlow graphical programming call, realize zero development, out-of-the-box user experience. The compact design and cost performance are suitable for various wireless camera application scenarios.
Product Features
- Simplified design
- ESP32 control core
- 2MegaPixel camera (OV2640)
- UART communication (support image data acquisition, image parameter adjustment and other interfaces)
- WIFI image transmission
- Programming platform: ESP-IDF/Arduino/UIFlow
Include
- 1x Unit CAM
Applications
- Wi-Fi camera
- Remote monitoring
Specification
| Resources | Parameter |
|---|---|
| Flash | 4M |
| Firmware default communication method | UART: 115200bps 8N1 |
| Camera | OV2640 |
| Maximum resolution | 2MegaPixel |
| Unit CAM firmware default picture transfer rate | 12fps |
| OV2640 supports output format | YUV(422/420)/YCbCr422, 8-bit compressed data, RGB565/555, 8-/10-bit Raw RGB data |
| DFOV | 66.5° |
| Net weight | 4.7g |
| Gross weight | 5.3g |
| Product Size | 45*20*12mm |
| Package Size | 60*60*15mm |
Flash Download
Unit CAM does not include a program download circuit. When the user needs to download the ESP32 update program, the program can be burned through an external connection with a USB-TTL downloader. Click here to buy ESP32 download board
PinMap
OV2640 Interface
| Interface | Camera Pin | Unit CAM |
|---|---|---|
| SCCB Clock | SIOC | IO23 |
| SCCB Data | SIOD | IO25 |
| System Clock | XCLK | IO27 |
| Vertical Sync | VSYNC | IO22 |
| Horizontal Reference | HREF | IO26 |
| Pixel Clock | PCLK | IO21 |
| Pixel Data Bit 0 | D0 | IO32 |
| Pixel Data Bit 1 | D1 | IO35 |
| Pixel Data Bit 2 | D2 | IO34 |
| Pixel Data Bit 3 | D3 | IO5 |
| Pixel Data Bit 4 | D4 | IO39 |
| Pixel Data Bit 5 | D5 | IO18 |
| Pixel Data Bit 6 | D6 | IO36 |
| Pixel Data Bit 7 | D7 | IO19 |
| Camera Reset | RESET | IO15 |
| Camera Power Down | PWDN | -1 |
| Power Supply 3.3V | 3V3 | 3V3 |
| Ground | GND | GND |
HY2.0-4P Interface
| HY2.0-4P | Unit CAM |
|---|---|
| RX | IO16 |
| TX | IO17 |
| 5V | 5V |
| GND | GND |
LED （blue）
| LED | Unit CAM |
|---|---|
| D1 | IO4 |
Schematic
Related Link
- Datasheet
Example
UIFlow
Arduino
ESP IDF
idf.py menuconfig
Component config->ESP32-specific->Hardware brownout detect & reset（disable）
