Cardputer v1.1

SKU:K132-V11

Description

Cardputer v1.1 is a high-performance card computer designed for engineers, offering a comprehensive upgrade over the original Cardputer. The new version adopts the brand new Stamp-S3A main controller, with optimized antenna and button design for the core module, significantly improving system stability and user operation experience.
In terms of control and interaction, it features a 56-key keyboard and a 1.14-inch TFT display for efficient operation and display; a built-in SPM1423 digital MEMS microphone supports recording and wake-up functions, while a cavity speaker outputs audio; an infrared emitter enables external infrared control interactions.
For expansion, the built-in Grove interface allows for custom sensor extensions; storage is supported via a Micro SD card slot for storage expansion. The power system consists of a built-in 120mAh battery and a 1400mAh base lithium battery, with integrated charging and power conversion circuits for greatly improved battery life. The base has an integrated magnet for metal surface attachment and is compatible with LEGO hole extensions.
This product is widely applicable to scenarios such as rapid function verification for engineers, industrial control, and home control systems.

Tutorial

Arduino IDE

Arduino IDE

This tutorial will introduce how to program and control the Cardputer v1.1 device using the Arduino IDE.

UiFlow2

UiFlow2

This tutorial will introduce how to control the Cardputer v1.1 device using the UiFlow2 graphical programming platform.

Note

• LCD and RGB LED usage note: Since RGB and LCD backlight share the same power source, when the LCD backlight brightness is below 100%, RGB will not be powered properly. Please use the RGB function when the backlight is at full brightness.

Features

• Stamp-S3A microcontroller
• 56-key keyboard
• 1.14-inch TFT display
• Cavity speaker and SPM1423 digital MEMS microphone
• Infrared emitter for infrared control interactions
• HY2.0-4P interface
• microSD card slot
• Built-in 120mAh and base 1400mAh lithium batteries
• Base with magnets
• LEGO hole expansion compatibility
• Development Platform
  • UiFlow2
  • Arduino IDE
  • ESP-IDF
  • PlatformIO

Includes

• 1 x Cardputer V1.1
• 1 x Hex Key L-Shape 1.5mm (For M2 Screw)

Applications

• Rapid function verification and prototyping
• Industrial control and automation
• Home control systems
• Data acquisition and sensor monitoring
• Embedded system development and learning
• Wireless communication and IoT projects

Specifications

Learn

Enter Download Mode

To enter download mode, set the side power switch of the Cardputer v1.1 to the OFF position, then hold down the G0 button before powering on the device, release it after the device is powered on, and the device will enter download mode.

Charging Notes

When charging the Cardputer v1.1, please switch the power to ON.

Disassembly Notes

When removing the Stamp-S3A on the panel, be careful with the FPC cable and connector on the back. Gently lift them up, otherwise the socket for the display connection may be damaged. Refer to the operation video in Cardputer Accessory Kit for guidance.

Schematics

• Cardputer V1.1 Schematics PDF
• Cardputer V1.1 Base Schematics PDF
• Stamp-S3A Schematics PDF

1/4

PinMap

SPM1423 MIC

microSD Socket

ST7789V2 & RGB LED

Keyboard & Battery Detect

Speaker & IR

HY2.0-4P

Model Size

Datasheets

• SPM1423
• NS4168
• ST7789V2

Softwares

Arduino

• Cardputer v1.1 Arduino Quick Start
• Cardputer v1.1 Arduino Library

UiFlow2

• Cardputer v1.1 UiFlow2 Quick Start

PlatformIO

[env:m5stack-cardputer]
platform = espressif32@6.7.0
board = esp32-s3-devkitc-1
framework = arduino
upload_speed = 1500000
build_flags =
    -DESP32S3
    -DCORE_DEBUG_LEVEL=5
    -DARDUINO_USB_CDC_ON_BOOT=1
    -DARDUINO_USB_MODE=1

lib_deps =
    M5Cardputer=https://github.com/m5stack/M5Cardputer

ESP-IDF

• Cardputer v1.1 Factory Firmware

Easyloader

Video

• Cardputer v1.1 Product Introduction and Case Demonstration

Product Comparison

Product Compare	Cardputer v1.1	Cardputer
Core Module	Stamp-S3A	StampS3
RGB LED Control Logic	RGB LED shares power with screen backlight, optimized control logic	Powered immediately upon power-on
Antenna Design	Optimized antenna design, better signal reception	Standard antenna design
StampS3 Module Boot Key	Improved key feel, key size 4.0 x 3.0 x 2.0mm	Key size 2.6 x 1.6 x 0.55mm
Power Consumption	Optimized for lower power consumption	Standard design

To compare information on the Cardputer series products, you can visit the Product Selection Table, check the target products, and get the comparison results. The selection table covers key information such as core parameters and functional features, and supports comparison of multiple products simultaneously.

Version Change