Arduino Guide
1. Arduino Setup
2. API & Examples
M5Tough
M5NanoC6
3. M5Unified
M5StickCPlus2 Program Compilation and Upload
1. Preparation
- Arduino IDE Installation: Refer to the Arduino IDE Installation Guide to complete the IDE installation.
- Board Manager Installation: Refer to the
Basic Environment Setup Guide
to complete the M5Stack board management installation and select the development board
M5StickCPlus2.
- Library Installation: Refer to the
Library Management Installation Guide
to complete the installation of the
M5StickCPlus2driver library.
2. USB Driver Installation
Driver Installation Tip
Click the link below to download the driver matching your operating system. The driver package for the CP34X (for the
CH9102 version) can be downloaded and installed by selecting the installation package corresponding to your operating system. If you encounter issues with program download (such as timeout or "Failed to write to target RAM" errors), try reinstalling the device driver.| Driver Name | Applicable Driver Chip | Download Link |
|---|---|---|
| CH9102_VCP_SER_Windows | CH9102 | Download |
| CH9102_VCP_SER_MacOS v1.7 | CH9102 | Download |
Port Selection on MacOS
On MacOS, there may be two available ports. When using them, please select the port named wchmodem.
3. Port Selection
Connect the device to the computer via a USB cable. After completing the driver installation, select the corresponding device port in the Arduino IDE.
4. Program Compilation & Upload
Open the example program “display” from the driver library. Click the upload button to automatically compile and upload the program.
The effect is as shown below:
