Dial Arduino Example Compile & Flash

1.Preparation

• 1.Arduino IDE Installation: Refer to the Arduino IDE Installation Guide to complete the IDE installation.
• 2.Board Manager Installation: Refer to the Board Manager Installation Guide to install the M5Stack board manager and select the development board M5dial.

• 3.Library Installation: Refer to the Library Manager Installation Guide to install the M5dial driver library, and download all dependent libraries as prompted.

2.Download Mode

Press and hold the G0 button on the Stamp module on the back of the product. Connect the device to your computer via a USB-C data cable, then release the button. The device will enter download mode.

3.Port Selection

After completing the above steps, select the corresponding development board and device port in the Arduino IDE.

4.Program Compile & Flash

Open the display example program from the M5Dial library and click Upload to flash the code.

After compilation and uploading are completed, the screen will display as shown below:

5.Related Resources

• GitHub
  • M5Dial Library
• Arduino API & Examples
  • Button
  • Buzzer
  • Display
  • Encoder
  • RFID
  • RTC
  • Touch
  • Wakeup