M5TimerCAM Program Compilation and Flashing

M5CoreS3 Series API and Example Programs


2.USB Driver Installation

Connect the device to a PC and open the Device Manager to install the FTDI driver for the device. For Windows 10, download the driver file that matches the operating system, and extract it, then install it through the Device Manager. (Note: In some system environments, the driver needs to be installed twice to take effect. The unrecognized device name is usually M5Stack or USB Serial. Windows recommends using the driver file for direct installation in the Device Manager (custom update), and the executable file installation method may not work properly). Click here to download the FTDI driver
For MacOS users, please check System Preferences -> Security & Privacy -> General -> Allow apps downloaded from -> App Store and identified developers before installing.

3.Port Selection

  1. Connect the device to the computer via USB cable. After completing the driver installation, you can select the corresponding device's port in the Arduino IDE.

4.Program Compilation & Flashing

  1. Open the example program from the driver library, click the upload button, and the program will automatically compile and flash.
On This Page