M5Capsule Program Compilation and Flashing

1. Preparation

• Arduino IDE Installation: Follow the Arduino IDE installation tutorial to complete the IDE installation.
• Board Manager Installation: Refer to the Basic Environment Setup Tutorial to complete the IDE and M5Stack board manager installation and select the M5Capsule development board.
• Library Installation: Follow the Library Management Installation Tutorial to complete the installation of the M5Capsule driver library.

2. Download Mode

• Before powering on, press and hold the G0 button on the StampS3, then connect the USB cable to power on to enter the download mode.
  

3. Port Selection

1. Connect the device to the computer via a USB cable. After completing the driver installation, you can select the corresponding device's port in the Arduino IDE.

4. Program Compilation & Flashing

1. Open an example program from the driver library, click the upload button, and the program will automatically compile and flash.

5. Related Resources

• Github

  • M5Capsule-Lib

• Arduino API & Examples

  • buzzer
  • button
  • rtc
  • wakeup