Arduino Guide
#include "M5StickCPlus2.h"
void setup() {
auto cfg = M5.config();
StickCP2.begin(cfg);
StickCP2.Display.setRotation(1);
StickCP2.Display.setTextColor(GREEN);
StickCP2.Display.setTextDatum(middle_center);
StickCP2.Display.setTextFont(&fonts::Orbitron_Light_24);
StickCP2.Display.setTextSize(1);
StickCP2.Display.drawString("Buzzer Test", StickCP2.Display.width() / 2,
StickCP2.Display.height() / 2);
}
void loop() {
StickCP2.Speaker.tone(10000, 100);
delay(1000);
StickCP2.Speaker.tone(4000, 20);
delay(1000);
}