pdf-icon

PWM

PWM用于产生模拟信号驱动舵机或蜂鸣器

ledcSetup()

功能:

设置PWM通道,频率和分辨率

函数原型:

void ledcSetup(uint8_t channel, double freq, uint8_t resolution_bits)

ledcAttachPin()

功能:

将 LEDC 通道绑定到指定 IO 口上以实现输出

函数原型:

void ledcAttachPin(uint8_t pin, uint8_t channel)

使用示例:

#include <M5StickC.h>

void setup() {
  M5.begin();
  ledcSetup(8, 1,10);  
          // Set the frequency of LEDC channel 8 to 1 and the resolution to
          // 10 bits, that is, the duty cycle can be selected from 0 to
          // 1023. 设置LEDC通道8频率为1,分辨率为10位,即占空比可选0~1023
  ledcAttachPin(32,8);
          // Set LEDC channel 8 to output on IO32.  设置LEDC通道8在IO32上输出
}

void loop() {}

ledWrite()

功能:

向channel通道写入duty%占空比

函数原型:

void ledcWrite(uint8_t channel, uint32_t duty)

使用示例:

#include <M5StickC.h>
int freq = 1800;
int channel = 0;
int resolution_bits = 8;
int buzzer = 2;

void setup() {
  M5.begin();
  ledcSetup(channel, freq, resolution_bits);
  ledcAttachPin(buzzer, channel);
}
void loop() {
    ledcWrite(channel, 128);
    delay(1000);
    ledcWrite(channel, 0);
    delay(1000);
}
On This Page